Toronto and the GTA: A Real 12-Stop Delivery Route and the 407 ETR
We ran MiliRoute on 12 real places across the Greater Toronto Area, from Whitby to Oakville and Brampton. With tolls allowed, the quickest order was 248.6 km and 3 h 36 min of driving. With tolls avoided it was 239.3 km and 3 h 57 min: 9.3 km shorter but 21.1 minutes slower. (source: our MiliRoute runs on 7 November 2026)
Quick facts
- Area: 12 places across the Greater Toronto Area: Toronto, Scarborough, Mississauga, Brampton, Vaughan, Richmond Hill, Markham, Oakville and Whitby.
- Tolls allowed: 248.6 km, 3 h 36 min (216.1 minutes).
- Tolls avoided: 239.3 km, 3 h 57 min (237.2 minutes).
- List order: 415.1 km, 5 h 27 min with tolls allowed.
- Method: MiliRoute's exact solver (10 stops between the start and the end), Google's estimated driving times for average traffic. One run on 2026-11-07.
Key takeaways
- Same 12 stops, two settings. Tolls allowed: 248.6 km, 216.1 minutes. Tolls avoided: 239.3 km, 237.2 minutes. So avoiding tolls was 248.6 − 239.3 = 9.3 km shorter and 237.2 − 216.1 = 21.1 minutes slower (21.1 ÷ 216.1 = 10% more driving time).
- Avoiding tolls changed the order of 6 of the 12 stops, not only the roads.
- Either way the quickest order beat the list order: 415.1 km in list order against 248.6 km (tolls allowed). 415.1 − 248.6 = 166.5 km, and 166.5 ÷ 415.1 = 40% shorter. 327.3 − 216.1 = 111.2, and 111.2 ÷ 327.3 = 34% quicker.
- Highway 407 ETR is a toll road in the Greater Toronto Area. Without a transponder, its cameras scan your licence plate and the bill goes to the registered owner (source: 407 ETR, Rates & Fees).
- MiliRoute shows distance and driving time, not the price of a toll. Check 407 ETR's own page for the price of your trip.
- This is one wide test on one day with Google's estimated driving times for average traffic.
- It has 12 stops, over the Free plan's 10. You would use Premium, or split the day into two routes.
What did we test?
- 12 public places across the Greater Toronto Area: Brampton Gateway Terminal, Mississauga's Square One Shopping Centre, Oakville GO Station, the CN Tower, Union Station, Pearson International Airport, Vaughan Mills, Richmond Hill Centre, Markham Civic Centre, Whitby GO Station, Scarborough Town Centre and Yorkdale Shopping Centre.
- A wide area on purpose. This is the sort of run a courier makes when one depot serves the whole region, with drops in several cities. It is not a downtown walking route. For a tight downtown example, see our earlier Toronto run.
- A neutral list order. We listed the places alphabetically. We did not arrange the list to look bad.
- Start and end fixed by the list. The first place is the start (Brampton Gateway Terminal) and the last is the end (Yorkdale Shopping Centre).
- Two settings. MiliRoute's Avoid tolls setting off, then on. Everything else was identical.
- MiliRoute's optimizer, using Google's estimated driving time between every pair of stops for average traffic. For 10 stops between the start and the end it finds the exact quickest order for the setting you choose.
- One run on 2026-11-07. The results are saved so the numbers can be checked.

What were the 12 stops?
In list order, as entered:
| # | Place | Area |
|---|---|---|
| 1 (start) | Brampton Gateway Terminal | Brampton |
| 2 | CN Tower | Toronto |
| 3 | Markham Civic Centre | Markham |
| 4 | Mississauga Square One Shopping Centre | Mississauga |
| 5 | Oakville GO Station | Oakville |
| 6 | Pearson International Airport | Mississauga |
| 7 | Richmond Hill Centre | Richmond Hill |
| 8 | Scarborough Town Centre | Toronto |
| 9 | Union Station | Toronto |
| 10 | Vaughan Mills | Vaughan |
| 11 | Whitby GO Station | Whitby |
| 12 (end) | Yorkdale Shopping Centre | Toronto |

What does the quickest order look like with tolls allowed?
| Stop | Place | Leg from the stop before | Leg time |
|---|---|---|---|
| 1 (start) | Brampton Gateway Terminal | ||
| 2 | Mississauga Square One Shopping Centre | 15.9 km | 16 min |
| 3 | Oakville GO Station | 22.5 km | 20 min |
| 4 | CN Tower | 36.1 km | 34 min |
| 5 | Union Station | 0.8 km | 4 min |
| 6 | Pearson International Airport | 26.7 km | 23 min |
| 7 | Vaughan Mills | 22.4 km | 17 min |
| 8 | Richmond Hill Centre | 18.0 km | 14 min |
| 9 | Markham Civic Centre | 11.7 km | 14 min |
| 10 | Whitby GO Station | 45.3 km | 31 min |
| 11 | Scarborough Town Centre | 30.8 km | 27 min |
| 12 (end) | Yorkdale Shopping Centre | 18.3 km | 17 min |
| Whole route | 248.6 km | 3 h 36 min |
(source: our MiliRoute runs on 7 November 2026)
The route goes west first (Mississauga, Oakville), swings into downtown for the CN Tower and Union Station, then runs out to the airport, north to Vaughan and Richmond Hill, east to Markham, across to Whitby, back to Scarborough and ends at Yorkdale. The average leg is 19.6 minutes. The longest is Oakville GO Station to CN Tower: 36.1 km and 34 minutes.
How much did the quickest order save over the list order?
415.1 − 248.6 = 166.5 km, and 166.5 ÷ 415.1 = 40% shorter. 327.3 − 216.1 = 111.2, and 111.2 ÷ 327.3 = 34% quicker. In plain words, taking these stops in list order would have meant 166.5 more kilometres and 111.2 more minutes of driving (1 h 51 min).
Assumption, for illustration: suppose each stop takes 5 minutes. Twelve stops at 5 minutes is 60 minutes. Quickest order: 216.1 + 60 = 276.1 minutes, about 4 h 36 min. List order: 327.3 + 60 = 387.3 minutes, about 6 h 27 min. Your stop time will differ. The saving is all in the driving.
What changed when we avoided tolls?
We switched on the Avoid tolls setting and optimized the same 12 stops again.
| Stop | Place | Leg from the stop before | Leg time |
|---|---|---|---|
| 1 (start) | Brampton Gateway Terminal | ||
| 2 | Mississauga Square One Shopping Centre | 15.9 km | 16 min |
| 3 | Oakville GO Station | 22.5 km | 20 min |
| 4 | CN Tower | 36.1 km | 34 min |
| 5 | Union Station | 0.8 km | 4 min |
| 6 | Whitby GO Station | 55.0 km | 44 min |
| 7 | Scarborough Town Centre | 30.8 km | 27 min |
| 8 | Markham Civic Centre | 19.3 km | 20 min |
| 9 | Richmond Hill Centre | 7.9 km | 17 min |
| 10 | Vaughan Mills | 11.7 km | 18 min |
| 11 | Pearson International Airport | 23.3 km | 20 min |
| 12 (end) | Yorkdale Shopping Centre | 16.0 km | 18 min |
| Whole route | 239.3 km | 3 h 57 min |
(source: our MiliRoute runs on 7 November 2026)
The two routes agree for the first 5 stops and then part ways. With tolls allowed, the quickest order goes on to Pearson International Airport. With tolls avoided it goes to Whitby GO Station. The stops that sit in a different place in the order are Whitby GO Station, Scarborough Town Centre, Markham Civic Centre, Richmond Hill Centre, Vaughan Mills and Pearson International Airport.
The longest leg with tolls avoided is Union Station to Whitby GO Station: 55.0 km and 44 minutes. With tolls allowed the longest leg is 36.1 km and 34 minutes. The toll-free route covers fewer kilometres because it uses a different order, but its driving time is 21.1 minutes higher. MiliRoute puts the stops in the order with the shortest total driving time. It does not minimise distance.

One honest limit: the route data does not label which road each leg used. The setting follows Google's rules for toll roads. Highway 407 ETR is the toll road the Greater Toronto Area is known for, but we cannot tell you which legs used it. Treat the result as a comparison of time and distance.
How does Highway 407 ETR charge a courier?
Facts from the operator's own page, which we read on 2026-11-07 (source: 407 ETR, Rates & Fees):
- If you drive a light or medium vehicle without a transponder, an automated system scans your licence plate and sends a bill to the registered owner of the vehicle.
- Vehicles over 5,000 kg must have a valid transponder.
- If you drive a rental vehicle, the bill goes to the rental car company, which decides how to pass on the toll and any added fees.
- Out-of-town drivers of motorcycles, light or medium vehicles do not need a transponder or an account. A bill is sent within 45 days of the first trip.
That matters for a courier: the person who is billed is the registered owner, not the driver. If you drive a vehicle that belongs to a company, a relative or a rental firm, agree who pays before the first trip. The current price per kilometre and the other fees are on the operator's page, and we do not quote them because they change. Use the operator's trip calculator for your own run.

Is 21.1 minutes worth a toll?
Only you can say. Work it out with two numbers:
- The toll you would pay for your vehicle on the stretch involved. Look it up on the operator's page, because it depends on the distance, the time and the vehicle.
- What a minute of your time is worth. Divide the toll by 21.1. If the answer is less than the value of a minute of your time, the toll pays for itself.
For example, with an assumed toll of C$10 for the whole day, C$10 ÷ 21.1 minutes = C$0.47 per minute. The C$10 is an illustration, not a real price. Put in the real number from the operator's calculator.
How do you avoid tolls in MiliRoute?
In the Android app, open Profile, then Route Settings, and switch on Avoid tolls. The setting is used the next time you optimize a route. In the web app, open Settings and tick Avoid tolls. If you change it, optimize again so the order is worked out with the new setting.
What does this mean for a Toronto courier?
- Compare both settings once. Run your usual area with Avoid tolls on and off and read the two totals. Your own numbers matter more than ours.
- Expect the order to change. The toll setting can reorder your stops, so re-optimize after changing it.
- Split a wide region. When your drops spread across several cities, two routes of up to 10 stops each fit the Free plan and keep each driver in one part of the region. See how to organize a big delivery route without losing track of any stop.
- Do not rely on "next closest". See why the closest stop is not always the fastest route.
- Read the Canadian details. Postal codes, kilometres and the CRA allowance are covered in route planner for couriers in Canada, MiliRoute for Canada and our CRA mileage allowance calculator.

Questions
What is the quickest way to order 12 delivery stops in the Greater Toronto Area?
Put them in the order with the shortest total driving time, not the nearest stop each time. In our run of 12 places across the region, that was 248.6 km and 3 h 36 min with tolls allowed, against 415.1 km and 5 h 27 min in list order. A planner such as MiliRoute works it out for you.
Does avoiding tolls make a Toronto route slower?
In this run it did: 21.1 minutes slower, although 9.3 km shorter. With other stops or another time of day the result can differ, so test your own run.
Does MiliRoute show the cost of Highway 407 ETR?
No. It shows distance and driving time for each leg and for the whole route. The toll depends on your vehicle, the distance and the time, so use the operator's own calculator.
Who gets the bill for a 407 ETR trip without a transponder?
The registered owner of the vehicle, according to the operator's page linked above. If the vehicle is a rental, the bill goes to the rental car company.
How were the 12 stops chosen?
They are well-known public places, so anyone can repeat the test. They are not customer addresses.
Will I get the same result?
Not exactly. The result depends on your stops, your start and end, the traffic and the time of day. The method is the same.
Does MiliRoute work with Canadian postal codes and addresses?
Yes. Address search and the camera scanner accept addresses in Canada. See how to scan delivery addresses with your phone camera.
Can I plan 12 stops on the Free plan?
The Free plan covers routes of up to 10 stops. For 12 you would use Premium, or split the day into two routes. See Free vs Premium.
Sources
- MiliRoute optimizer runs on 2026-11-07: 12 public places across the Greater Toronto Area, tolls allowed and tolls avoided, Google driving-time estimates for average traffic, exact solver. Results saved.
- 407 ETR, Rates & Fees, read on 2026-11-07: how trips are billed without a transponder, the 5,000 kg transponder rule, rental vehicles and out-of-town drivers.
Last updated 7 November 2026.